""" Indicates exactly one field must be supplied and this field must not be `null`. """ directive @oneOf on INPUT_OBJECT """Directive to document required permissions for fields""" directive @usePermissions( """The action required for access (must be a valid AuthAction enum value)""" action: String """The resource required for access (must be a valid Resource enum value)""" resource: String ) on FIELD_DEFINITION type ParityCheck { """Date of the parity check""" date: DateTime """Duration of the parity check in seconds""" duration: Int """Speed of the parity check, in MB/s""" speed: String """Status of the parity check""" status: ParityCheckStatus! """Number of errors during the parity check""" errors: Int """Progress percentage of the parity check""" progress: Int """Whether corrections are being written to parity""" correcting: Boolean """Whether the parity check is paused""" paused: Boolean """Whether the parity check is running""" running: Boolean } """ A date-time string at UTC, such as 2019-12-03T09:54:33Z, compliant with the date-time format. """ scalar DateTime enum ParityCheckStatus { NEVER_RUN RUNNING PAUSED COMPLETED CANCELLED FAILED } type Capacity { """Free capacity""" free: String! """Used capacity""" used: String! """Total capacity""" total: String! } type ArrayCapacity { """Capacity in kilobytes""" kilobytes: Capacity! """Capacity in number of disks""" disks: Capacity! } type ArrayDisk implements Node { id: PrefixedID! """ Array slot number. Parity1 is always 0 and Parity2 is always 29. Array slots will be 1 - 28. Cache slots are 30 - 53. Flash is 54. """ idx: Int! name: String device: String """(KB) Disk Size total""" size: BigInt status: ArrayDiskStatus """Is the disk a HDD or SSD.""" rotational: Boolean """Disk temp - will be NaN if array is not started or DISK_NP""" temp: Int """ Count of I/O read requests sent to the device I/O drivers. These statistics may be cleared at any time. """ numReads: BigInt """ Count of I/O writes requests sent to the device I/O drivers. These statistics may be cleared at any time. """ numWrites: BigInt """ Number of unrecoverable errors reported by the device I/O drivers. Missing data due to unrecoverable array read errors is filled in on-the-fly using parity reconstruct (and we attempt to write this data back to the sector(s) which failed). Any unrecoverable write error results in disabling the disk. """ numErrors: BigInt """(KB) Total Size of the FS (Not present on Parity type drive)""" fsSize: BigInt """(KB) Free Size on the FS (Not present on Parity type drive)""" fsFree: BigInt """(KB) Used Size on the FS (Not present on Parity type drive)""" fsUsed: BigInt exportable: Boolean """Type of Disk - used to differentiate Cache / Flash / Array / Parity""" type: ArrayDiskType! """(%) Disk space left to warn""" warning: Int """(%) Disk space left for critical""" critical: Int """File system type for the disk""" fsType: String """User comment on disk""" comment: String """File format (ex MBR: 4KiB-aligned)""" format: String """ata | nvme | usb | (others)""" transport: String color: ArrayDiskFsColor """Whether the disk is currently spinning""" isSpinning: Boolean } interface Node { id: PrefixedID! } """ The `BigInt` scalar type represents non-fractional signed whole numeric values. """ scalar BigInt enum ArrayDiskStatus { DISK_NP DISK_OK DISK_NP_MISSING DISK_INVALID DISK_WRONG DISK_DSBL DISK_NP_DSBL DISK_DSBL_NEW DISK_NEW } enum ArrayDiskType { DATA PARITY FLASH CACHE } enum ArrayDiskFsColor { GREEN_ON GREEN_BLINK BLUE_ON BLUE_BLINK YELLOW_ON YELLOW_BLINK RED_ON RED_OFF GREY_OFF } type UnraidArray implements Node { id: PrefixedID! """Current array state""" state: ArrayState! """Current array capacity""" capacity: ArrayCapacity! """Current boot disk""" boot: ArrayDisk """Parity disks in the current array""" parities: [ArrayDisk!]! """Current parity check status""" parityCheckStatus: ParityCheck! """Data disks in the current array""" disks: [ArrayDisk!]! """Caches in the current array""" caches: [ArrayDisk!]! } enum ArrayState { STARTED STOPPED NEW_ARRAY RECON_DISK DISABLE_DISK SWAP_DSBL INVALID_EXPANSION PARITY_NOT_BIGGEST TOO_MANY_MISSING_DISKS NEW_DISK_TOO_SMALL NO_DATA_DISKS } type Share implements Node { id: PrefixedID! """Display name""" name: String """(KB) Free space""" free: BigInt """(KB) Used Size""" used: BigInt """(KB) Total size""" size: BigInt """Disks that are included in this share""" include: [String!] """Disks that are excluded from this share""" exclude: [String!] """Is this share cached""" cache: Boolean """Original name""" nameOrig: String """User comment""" comment: String """Allocator""" allocator: String """Split level""" splitLevel: String """Floor""" floor: String """COW""" cow: String """Color""" color: String """LUKS status""" luksStatus: String } type DiskPartition { """The name of the partition""" name: String! """The filesystem type of the partition""" fsType: DiskFsType! """The size of the partition in bytes""" size: Float! } """The type of filesystem on the disk partition""" enum DiskFsType { XFS BTRFS VFAT ZFS EXT4 NTFS } type Disk implements Node { id: PrefixedID! """The device path of the disk (e.g. /dev/sdb)""" device: String! """The type of disk (e.g. SSD, HDD)""" type: String! """The model name of the disk""" name: String! """The manufacturer of the disk""" vendor: String! """The total size of the disk in bytes""" size: Float! """The number of bytes per sector""" bytesPerSector: Float! """The total number of cylinders on the disk""" totalCylinders: Float! """The total number of heads on the disk""" totalHeads: Float! """The total number of sectors on the disk""" totalSectors: Float! """The total number of tracks on the disk""" totalTracks: Float! """The number of tracks per cylinder""" tracksPerCylinder: Float! """The number of sectors per track""" sectorsPerTrack: Float! """The firmware revision of the disk""" firmwareRevision: String! """The serial number of the disk""" serialNum: String! """The interface type of the disk""" interfaceType: DiskInterfaceType! """The SMART status of the disk""" smartStatus: DiskSmartStatus! """The current temperature of the disk in Celsius""" temperature: Float """The partitions on the disk""" partitions: [DiskPartition!]! """Whether the disk is spinning or not""" isSpinning: Boolean! } """The type of interface the disk uses to connect to the system""" enum DiskInterfaceType { SAS SATA USB PCIE UNKNOWN } """ The SMART (Self-Monitoring, Analysis and Reporting Technology) status of the disk """ enum DiskSmartStatus { OK UNKNOWN } type KeyFile { location: String contents: String } type Registration implements Node { id: PrefixedID! type: registrationType keyFile: KeyFile state: RegistrationState expiration: String updateExpiration: String } enum registrationType { BASIC PLUS PRO STARTER UNLEASHED LIFETIME INVALID TRIAL } enum RegistrationState { TRIAL BASIC PLUS PRO STARTER UNLEASHED LIFETIME EEXPIRED EGUID EGUID1 ETRIAL ENOKEYFILE ENOKEYFILE1 ENOKEYFILE2 ENOFLASH ENOFLASH1 ENOFLASH2 ENOFLASH3 ENOFLASH4 ENOFLASH5 ENOFLASH6 ENOFLASH7 EBLACKLISTED EBLACKLISTED1 EBLACKLISTED2 ENOCONN } type Vars implements Node { id: PrefixedID! """Unraid version""" version: String maxArraysz: Int maxCachesz: Int """Machine hostname""" name: String timeZone: String comment: String security: String workgroup: String domain: String domainShort: String hideDotFiles: Boolean localMaster: Boolean enableFruit: String """Should a NTP server be used for time sync?""" useNtp: Boolean """NTP Server 1""" ntpServer1: String """NTP Server 2""" ntpServer2: String """NTP Server 3""" ntpServer3: String """NTP Server 4""" ntpServer4: String domainLogin: String sysModel: String sysArraySlots: Int sysCacheSlots: Int sysFlashSlots: Int useSsl: Boolean """Port for the webui via HTTP""" port: Int """Port for the webui via HTTPS""" portssl: Int localTld: String bindMgt: Boolean """Should telnet be enabled?""" useTelnet: Boolean porttelnet: Int useSsh: Boolean portssh: Int startPage: String startArray: Boolean spindownDelay: String queueDepth: String spinupGroups: Boolean defaultFormat: String defaultFsType: String shutdownTimeout: Int luksKeyfile: String pollAttributes: String pollAttributesDefault: String pollAttributesStatus: String nrRequests: Int nrRequestsDefault: Int nrRequestsStatus: String mdNumStripes: Int mdNumStripesDefault: Int mdNumStripesStatus: String mdSyncWindow: Int mdSyncWindowDefault: Int mdSyncWindowStatus: String mdSyncThresh: Int mdSyncThreshDefault: Int mdSyncThreshStatus: String mdWriteMethod: Int mdWriteMethodDefault: String mdWriteMethodStatus: String shareDisk: String shareUser: String shareUserInclude: String shareUserExclude: String shareSmbEnabled: Boolean shareNfsEnabled: Boolean shareAfpEnabled: Boolean shareInitialOwner: String shareInitialGroup: String shareCacheEnabled: Boolean shareCacheFloor: String shareMoverSchedule: String shareMoverLogging: Boolean fuseRemember: String fuseRememberDefault: String fuseRememberStatus: String fuseDirectio: String fuseDirectioDefault: String fuseDirectioStatus: String shareAvahiEnabled: Boolean shareAvahiSmbName: String shareAvahiSmbModel: String shareAvahiAfpName: String shareAvahiAfpModel: String safeMode: Boolean startMode: String configValid: Boolean configError: ConfigErrorState joinStatus: String deviceCount: Int flashGuid: String flashProduct: String flashVendor: String regCheck: String regFile: String regGuid: String regTy: registrationType regState: RegistrationState """Registration owner""" regTo: String regTm: String regTm2: String regGen: String sbName: String sbVersion: String sbUpdated: String sbEvents: Int sbState: String sbClean: Boolean sbSynced: Int sbSyncErrs: Int sbSynced2: Int sbSyncExit: String sbNumDisks: Int mdColor: String mdNumDisks: Int mdNumDisabled: Int mdNumInvalid: Int mdNumMissing: Int mdNumNew: Int mdNumErased: Int mdResync: Int mdResyncCorr: String mdResyncPos: String mdResyncDb: String mdResyncDt: String mdResyncAction: String mdResyncSize: Int mdState: String mdVersion: String cacheNumDevices: Int cacheSbNumDisks: Int fsState: String """Human friendly string of array events happening""" fsProgress: String """ Percentage from 0 - 100 while upgrading a disk or swapping parity drives """ fsCopyPrcnt: Int fsNumMounted: Int fsNumUnmountable: Int fsUnmountableMask: String """Total amount of user shares""" shareCount: Int """Total amount shares with SMB enabled""" shareSmbCount: Int """Total amount shares with NFS enabled""" shareNfsCount: Int """Total amount shares with AFP enabled""" shareAfpCount: Int shareMoverActive: Boolean csrfToken: String } """Possible error states for configuration""" enum ConfigErrorState { UNKNOWN_ERROR INELIGIBLE INVALID NO_KEY_SERVER WITHDRAWN } type ApiConfig { version: String! extraOrigins: [String!]! sandbox: Boolean ssoSubIds: [String!]! plugins: [String!]! } type Permission { resource: Resource! """Actions allowed on this resource""" actions: [AuthAction!]! } """Available resources for permissions""" enum Resource { ACTIVATION_CODE API_KEY ARRAY CLOUD CONFIG CONNECT CONNECT__REMOTE_ACCESS CUSTOMIZATIONS DASHBOARD DISK DISPLAY DOCKER FLASH INFO LOGS ME NETWORK NOTIFICATIONS ONLINE OS OWNER PERMISSION REGISTRATION SERVERS SERVICES SHARE VARS VMS WELCOME } """Authentication actions with possession (e.g., create:any, read:own)""" enum AuthAction { """Create any resource""" CREATE_ANY """Create own resource""" CREATE_OWN """Read any resource""" READ_ANY """Read own resource""" READ_OWN """Update any resource""" UPDATE_ANY """Update own resource""" UPDATE_OWN """Delete any resource""" DELETE_ANY """Delete own resource""" DELETE_OWN } type ApiKey implements Node { id: PrefixedID! key: String! name: String! description: String roles: [Role!]! createdAt: String! permissions: [Permission!]! } """Available roles for API keys and users""" enum Role { """Full administrative access to all resources""" ADMIN """Internal Role for Unraid Connect""" CONNECT """Basic read access to user profile only""" GUEST """Read-only access to all resources""" VIEWER } type NotificationCounts { info: Int! warning: Int! alert: Int! total: Int! } type NotificationOverview { unread: NotificationCounts! archive: NotificationCounts! } type Notification implements Node { id: PrefixedID! """Also known as 'event'""" title: String! subject: String! description: String! importance: NotificationImportance! link: String type: NotificationType! """ISO Timestamp for when the notification occurred""" timestamp: String formattedTimestamp: String } enum NotificationImportance { ALERT INFO WARNING } enum NotificationType { UNREAD ARCHIVE } type Notifications implements Node { id: PrefixedID! """A cached overview of the notifications in the system & their severity.""" overview: NotificationOverview! list(filter: NotificationFilter!): [Notification!]! } input NotificationFilter { importance: NotificationImportance type: NotificationType! offset: Int! limit: Int! } type SsoSettings implements Node { id: PrefixedID! """List of configured OIDC providers""" oidcProviders: [OidcProvider!]! } type UnifiedSettings implements Node & FormSchema { id: PrefixedID! """The data schema for the settings""" dataSchema: JSON! """The UI schema for the settings""" uiSchema: JSON! """The current values of the settings""" values: JSON! } interface FormSchema { """The data schema for the form""" dataSchema: JSON! """The UI schema for the form""" uiSchema: JSON! """The current values of the form""" values: JSON! } """ The `JSON` scalar type represents JSON values as specified by [ECMA-404](http://www.ecma-international.org/publications/files/ECMA-ST/ECMA-404.pdf). """ scalar JSON type ApiKeyFormSettings implements Node & FormSchema { id: PrefixedID! """The data schema for the API key form""" dataSchema: JSON! """The UI schema for the API key form""" uiSchema: JSON! """The current values of the API key form""" values: JSON! } type UpdateSettingsResponse { """Whether a restart is required for the changes to take effect""" restartRequired: Boolean! """The updated settings values""" values: JSON! """Warning messages about configuration issues found during validation""" warnings: [String!] } type Settings implements Node { id: PrefixedID! """A view of all settings""" unified: UnifiedSettings! """SSO settings""" sso: SsoSettings! """The API setting values""" api: ApiConfig! } type RCloneDrive { """Provider name""" name: String! """Provider options and configuration schema""" options: JSON! } type RCloneBackupConfigForm { id: ID! dataSchema: JSON! uiSchema: JSON! } type RCloneBackupSettings { configForm(formOptions: RCloneConfigFormInput): RCloneBackupConfigForm! drives: [RCloneDrive!]! remotes: [RCloneRemote!]! } input RCloneConfigFormInput { providerType: String showAdvanced: Boolean = false parameters: JSON } type RCloneRemote { name: String! type: String! parameters: JSON! """Complete remote configuration""" config: JSON! } type ArrayMutations { """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **ARRAY** #### Description: Set array state """ setState(input: ArrayStateInput!): UnraidArray! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **ARRAY** #### Description: Add new disk to array """ addDiskToArray(input: ArrayDiskInput!): UnraidArray! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **ARRAY** #### Description: Remove existing disk from array. NOTE: The array must be stopped before running this otherwise it'll throw an error. """ removeDiskFromArray(input: ArrayDiskInput!): UnraidArray! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **ARRAY** #### Description: Mount a disk in the array """ mountArrayDisk(id: PrefixedID!): ArrayDisk! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **ARRAY** #### Description: Unmount a disk from the array """ unmountArrayDisk(id: PrefixedID!): ArrayDisk! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **ARRAY** #### Description: Clear statistics for a disk in the array """ clearArrayDiskStatistics(id: PrefixedID!): Boolean! } input ArrayStateInput { """Array state""" desiredState: ArrayStateInputState! } enum ArrayStateInputState { START STOP } input ArrayDiskInput { """Disk ID""" id: PrefixedID! """The slot for the disk""" slot: Int } type DockerMutations { """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **DOCKER** #### Description: Start a container """ start(id: PrefixedID!): DockerContainer! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **DOCKER** #### Description: Stop a container """ stop(id: PrefixedID!): DockerContainer! } type VmMutations { """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **VMS** #### Description: Start a virtual machine """ start(id: PrefixedID!): Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **VMS** #### Description: Stop a virtual machine """ stop(id: PrefixedID!): Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **VMS** #### Description: Pause a virtual machine """ pause(id: PrefixedID!): Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **VMS** #### Description: Resume a virtual machine """ resume(id: PrefixedID!): Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **VMS** #### Description: Force stop a virtual machine """ forceStop(id: PrefixedID!): Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **VMS** #### Description: Reboot a virtual machine """ reboot(id: PrefixedID!): Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **VMS** #### Description: Reset a virtual machine """ reset(id: PrefixedID!): Boolean! } """API Key related mutations""" type ApiKeyMutations { """ #### Required Permissions: - Action: **CREATE_ANY** - Resource: **API_KEY** #### Description: Create an API key """ create(input: CreateApiKeyInput!): ApiKey! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **API_KEY** #### Description: Add a role to an API key """ addRole(input: AddRoleForApiKeyInput!): Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **API_KEY** #### Description: Remove a role from an API key """ removeRole(input: RemoveRoleFromApiKeyInput!): Boolean! """ #### Required Permissions: - Action: **DELETE_ANY** - Resource: **API_KEY** #### Description: Delete one or more API keys """ delete(input: DeleteApiKeyInput!): Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **API_KEY** #### Description: Update an API key """ update(input: UpdateApiKeyInput!): ApiKey! } input CreateApiKeyInput { name: String! description: String roles: [Role!] permissions: [AddPermissionInput!] """ This will replace the existing key if one already exists with the same name, otherwise returns the existing key """ overwrite: Boolean } input AddPermissionInput { resource: Resource! actions: [AuthAction!]! } input AddRoleForApiKeyInput { apiKeyId: PrefixedID! role: Role! } input RemoveRoleFromApiKeyInput { apiKeyId: PrefixedID! role: Role! } input DeleteApiKeyInput { ids: [PrefixedID!]! } input UpdateApiKeyInput { id: PrefixedID! name: String description: String roles: [Role!] permissions: [AddPermissionInput!] } """ Parity check related mutations, WIP, response types and functionaliy will change """ type ParityCheckMutations { """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **ARRAY** #### Description: Start a parity check """ start(correct: Boolean!): JSON! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **ARRAY** #### Description: Pause a parity check """ pause: JSON! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **ARRAY** #### Description: Resume a parity check """ resume: JSON! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **ARRAY** #### Description: Cancel a parity check """ cancel: JSON! } """RClone related mutations""" type RCloneMutations { """ #### Required Permissions: - Action: **CREATE_ANY** - Resource: **FLASH** #### Description: Create a new RClone remote """ createRCloneRemote(input: CreateRCloneRemoteInput!): RCloneRemote! """ #### Required Permissions: - Action: **DELETE_ANY** - Resource: **FLASH** #### Description: Delete an existing RClone remote """ deleteRCloneRemote(input: DeleteRCloneRemoteInput!): Boolean! } input CreateRCloneRemoteInput { name: String! type: String! parameters: JSON! } input DeleteRCloneRemoteInput { name: String! } type Config implements Node { id: PrefixedID! valid: Boolean error: String } type PublicPartnerInfo { partnerName: String """Indicates if a partner logo exists""" hasPartnerLogo: Boolean! partnerUrl: String """ The path to the partner logo image on the flash drive, relative to the activation code file """ partnerLogoUrl: String } type ActivationCode { code: String partnerName: String partnerUrl: String serverName: String sysModel: String comment: String header: String headermetacolor: String background: String showBannerGradient: Boolean theme: String } type Customization { """ #### Required Permissions: - Action: **READ_ANY** - Resource: **ACTIVATION_CODE** """ activationCode: ActivationCode partnerInfo: PublicPartnerInfo theme: Theme! } type Theme { """The theme name""" name: ThemeName! """Whether to show the header banner image""" showBannerImage: Boolean! """Whether to show the banner gradient""" showBannerGradient: Boolean! """Whether to show the description in the header""" showHeaderDescription: Boolean! """The background color of the header""" headerBackgroundColor: String """The text color of the header""" headerPrimaryTextColor: String """The secondary text color of the header""" headerSecondaryTextColor: String } """The theme name""" enum ThemeName { azure black gray white } type ExplicitStatusItem { name: String! updateStatus: UpdateStatus! } """Update status of a container.""" enum UpdateStatus { UP_TO_DATE UPDATE_AVAILABLE REBUILD_READY UNKNOWN } type ContainerPort { ip: String privatePort: Port publicPort: Port type: ContainerPortType! } """ A field whose value is a valid TCP port within the range of 0 to 65535: https://en.wikipedia.org/wiki/Transmission_Control_Protocol#TCP_ports """ scalar Port enum ContainerPortType { TCP UDP } type ContainerHostConfig { networkMode: String! } type DockerContainer implements Node { id: PrefixedID! names: [String!]! image: String! imageId: String! command: String! created: Int! ports: [ContainerPort!]! """Total size of all files in the container (in bytes)""" sizeRootFs: BigInt labels: JSON state: ContainerState! status: String! hostConfig: ContainerHostConfig networkSettings: JSON mounts: [JSON!] autoStart: Boolean! } enum ContainerState { RUNNING EXITED } type DockerNetwork implements Node { id: PrefixedID! name: String! created: String! scope: String! driver: String! enableIPv6: Boolean! ipam: JSON! internal: Boolean! attachable: Boolean! ingress: Boolean! configFrom: JSON! configOnly: Boolean! containers: JSON! options: JSON! labels: JSON! } type Docker implements Node { id: PrefixedID! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **DOCKER** """ containers(skipCache: Boolean! = false): [DockerContainer!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **DOCKER** """ networks(skipCache: Boolean! = false): [DockerNetwork!]! } type ResolvedOrganizerView { id: String! name: String! root: ResolvedOrganizerEntry! prefs: JSON } union ResolvedOrganizerEntry = ResolvedOrganizerFolder | OrganizerContainerResource | OrganizerResource type ResolvedOrganizerFolder { id: String! type: String! name: String! children: [ResolvedOrganizerEntry!]! } type OrganizerContainerResource { id: String! type: String! name: String! meta: DockerContainer } type OrganizerResource { id: String! type: String! name: String! meta: JSON } type ResolvedOrganizerV1 { version: Float! views: [ResolvedOrganizerView!]! } type FlashBackupStatus { """Status message indicating the outcome of the backup initiation.""" status: String! """Job ID if available, can be used to check job status.""" jobId: String } type Flash implements Node { id: PrefixedID! guid: String! vendor: String! product: String! } type InfoGpu implements Node { id: PrefixedID! """GPU type/manufacturer""" type: String! """GPU type identifier""" typeid: String! """Whether GPU is blacklisted""" blacklisted: Boolean! """Device class""" class: String! """Product ID""" productid: String! """Vendor name""" vendorname: String } type InfoNetwork implements Node { id: PrefixedID! """Network interface name""" iface: String! """Network interface model""" model: String """Network vendor""" vendor: String """MAC address""" mac: String """Virtual interface flag""" virtual: Boolean """Network speed""" speed: String """DHCP enabled flag""" dhcp: Boolean } type InfoPci implements Node { id: PrefixedID! """Device type/manufacturer""" type: String! """Type identifier""" typeid: String! """Vendor name""" vendorname: String """Vendor ID""" vendorid: String! """Product name""" productname: String """Product ID""" productid: String! """Blacklisted status""" blacklisted: String! """Device class""" class: String! } type InfoUsb implements Node { id: PrefixedID! """USB device name""" name: String! """USB bus number""" bus: String """USB device number""" device: String } type InfoDevices implements Node { id: PrefixedID! """List of GPU devices""" gpu: [InfoGpu!] """List of network interfaces""" network: [InfoNetwork!] """List of PCI devices""" pci: [InfoPci!] """List of USB devices""" usb: [InfoUsb!] } type InfoDisplayCase implements Node { id: PrefixedID! """Case image URL""" url: String! """Case icon identifier""" icon: String! """Error message if any""" error: String! """Base64 encoded case image""" base64: String! } type InfoDisplay implements Node { id: PrefixedID! """Case display configuration""" case: InfoDisplayCase! """UI theme name""" theme: ThemeName! """Temperature unit (C or F)""" unit: Temperature! """Enable UI scaling""" scale: Boolean! """Show tabs in UI""" tabs: Boolean! """Enable UI resize""" resize: Boolean! """Show WWN identifiers""" wwn: Boolean! """Show totals""" total: Boolean! """Show usage statistics""" usage: Boolean! """Show text labels""" text: Boolean! """Warning temperature threshold""" warning: Int! """Critical temperature threshold""" critical: Int! """Hot temperature threshold""" hot: Int! """Maximum temperature threshold""" max: Int """Locale setting""" locale: String } """Temperature unit""" enum Temperature { CELSIUS FAHRENHEIT } """CPU load for a single core""" type CpuLoad { """The total CPU load on a single core, in percent.""" percentTotal: Float! """The percentage of time the CPU spent in user space.""" percentUser: Float! """The percentage of time the CPU spent in kernel space.""" percentSystem: Float! """ The percentage of time the CPU spent on low-priority (niced) user space processes. """ percentNice: Float! """The percentage of time the CPU was idle.""" percentIdle: Float! """The percentage of time the CPU spent servicing hardware interrupts.""" percentIrq: Float! """The percentage of time the CPU spent running virtual machines (guest).""" percentGuest: Float! """The percentage of CPU time stolen by the hypervisor.""" percentSteal: Float! } type CpuPackages implements Node { id: PrefixedID! """Total CPU package power draw (W)""" totalPower: Float! """Power draw per package (W)""" power: [Float!]! """Temperature per package (°C)""" temp: [Float!]! } type CpuUtilization implements Node { id: PrefixedID! """Total CPU load in percent""" percentTotal: Float! """CPU load for each core""" cpus: [CpuLoad!]! } type InfoCpu implements Node { id: PrefixedID! """CPU manufacturer""" manufacturer: String """CPU brand name""" brand: String """CPU vendor""" vendor: String """CPU family""" family: String """CPU model""" model: String """CPU stepping""" stepping: Int """CPU revision""" revision: String """CPU voltage""" voltage: String """Current CPU speed in GHz""" speed: Float """Minimum CPU speed in GHz""" speedmin: Float """Maximum CPU speed in GHz""" speedmax: Float """Number of CPU threads""" threads: Int """Number of CPU cores""" cores: Int """Number of physical processors""" processors: Int """CPU socket type""" socket: String """CPU cache information""" cache: JSON """CPU feature flags""" flags: [String!] """ Per-package array of core/thread pairs, e.g. [[[0,1],[2,3]], [[4,5],[6,7]]] """ topology: [[[Int!]!]!]! packages: CpuPackages! } type MemoryLayout implements Node { id: PrefixedID! """Memory module size in bytes""" size: BigInt! """Memory bank location (e.g., BANK 0)""" bank: String """Memory type (e.g., DDR4, DDR5)""" type: String """Memory clock speed in MHz""" clockSpeed: Int """Part number of the memory module""" partNum: String """Serial number of the memory module""" serialNum: String """Memory manufacturer""" manufacturer: String """Form factor (e.g., DIMM, SODIMM)""" formFactor: String """Configured voltage in millivolts""" voltageConfigured: Int """Minimum voltage in millivolts""" voltageMin: Int """Maximum voltage in millivolts""" voltageMax: Int } type MemoryUtilization implements Node { id: PrefixedID! """Total system memory in bytes""" total: BigInt! """Used memory in bytes""" used: BigInt! """Free memory in bytes""" free: BigInt! """Available memory in bytes""" available: BigInt! """Active memory in bytes""" active: BigInt! """Buffer/cache memory in bytes""" buffcache: BigInt! """Memory usage percentage""" percentTotal: Float! """Total swap memory in bytes""" swapTotal: BigInt! """Used swap memory in bytes""" swapUsed: BigInt! """Free swap memory in bytes""" swapFree: BigInt! """Swap usage percentage""" percentSwapTotal: Float! } type InfoMemory implements Node { id: PrefixedID! """Physical memory layout""" layout: [MemoryLayout!]! } type InfoOs implements Node { id: PrefixedID! """Operating system platform""" platform: String """Linux distribution name""" distro: String """OS release version""" release: String """OS codename""" codename: String """Kernel version""" kernel: String """OS architecture""" arch: String """Hostname""" hostname: String """Fully qualified domain name""" fqdn: String """OS build identifier""" build: String """Service pack version""" servicepack: String """Boot time ISO string""" uptime: String """OS logo name""" logofile: String """OS serial number""" serial: String """OS started via UEFI""" uefi: Boolean } type InfoSystem implements Node { id: PrefixedID! """System manufacturer""" manufacturer: String """System model""" model: String """System version""" version: String """System serial number""" serial: String """System UUID""" uuid: String """System SKU""" sku: String """Virtual machine flag""" virtual: Boolean } type InfoBaseboard implements Node { id: PrefixedID! """Motherboard manufacturer""" manufacturer: String """Motherboard model""" model: String """Motherboard version""" version: String """Motherboard serial number""" serial: String """Motherboard asset tag""" assetTag: String """Maximum memory capacity in bytes""" memMax: Float """Number of memory slots""" memSlots: Float } type CoreVersions { """Unraid version""" unraid: String """Unraid API version""" api: String """Kernel version""" kernel: String } type PackageVersions { """OpenSSL version""" openssl: String """Node.js version""" node: String """npm version""" npm: String """pm2 version""" pm2: String """Git version""" git: String """nginx version""" nginx: String """PHP version""" php: String """Docker version""" docker: String } type InfoVersions implements Node { id: PrefixedID! """Core system versions""" core: CoreVersions! """Software package versions""" packages: PackageVersions } type Info implements Node { id: PrefixedID! """Current server time""" time: DateTime! """Motherboard information""" baseboard: InfoBaseboard! """CPU information""" cpu: InfoCpu! """Device information""" devices: InfoDevices! """Display configuration""" display: InfoDisplay! """Machine ID""" machineId: ID """Memory information""" memory: InfoMemory! """Operating system information""" os: InfoOs! """System information""" system: InfoSystem! """Software versions""" versions: InfoVersions! } type LogFile { """Name of the log file""" name: String! """Full path to the log file""" path: String! """Size of the log file in bytes""" size: Int! """Last modified timestamp""" modifiedAt: DateTime! } type LogFileContent { """Path to the log file""" path: String! """Content of the log file""" content: String! """Total number of lines in the file""" totalLines: Int! """Starting line number of the content (1-indexed)""" startLine: Int } """System metrics including CPU and memory utilization""" type Metrics implements Node { id: PrefixedID! """Current CPU utilization metrics""" cpu: CpuUtilization """Current memory utilization metrics""" memory: MemoryUtilization } type Owner { username: String! url: String! avatar: String! } type ProfileModel implements Node { id: PrefixedID! username: String! url: String! avatar: String! } type Server implements Node { id: PrefixedID! owner: ProfileModel! guid: String! apikey: String! name: String! """Whether this server is online or offline""" status: ServerStatus! wanip: String! lanip: String! localurl: String! remoteurl: String! } enum ServerStatus { ONLINE OFFLINE NEVER_CONNECTED } type OidcAuthorizationRule { """The claim to check (e.g., email, sub, groups, hd)""" claim: String! """The comparison operator""" operator: AuthorizationOperator! """The value(s) to match against""" value: [String!]! } """Operators for authorization rule matching""" enum AuthorizationOperator { EQUALS CONTAINS ENDS_WITH STARTS_WITH } type OidcProvider { """The unique identifier for the OIDC provider""" id: PrefixedID! """Display name of the OIDC provider""" name: String! """OAuth2 client ID registered with the provider""" clientId: String! """OAuth2 client secret (if required by provider)""" clientSecret: String """ OIDC issuer URL (e.g., https://accounts.google.com). Required for auto-discovery via /.well-known/openid-configuration """ issuer: String """ OAuth2 authorization endpoint URL. If omitted, will be auto-discovered from issuer/.well-known/openid-configuration """ authorizationEndpoint: String """ OAuth2 token endpoint URL. If omitted, will be auto-discovered from issuer/.well-known/openid-configuration """ tokenEndpoint: String """ JSON Web Key Set URI for token validation. If omitted, will be auto-discovered from issuer/.well-known/openid-configuration """ jwksUri: String """OAuth2 scopes to request (e.g., openid, profile, email)""" scopes: [String!]! """Flexible authorization rules based on claims""" authorizationRules: [OidcAuthorizationRule!] """ Mode for evaluating authorization rules - OR (any rule passes) or AND (all rules must pass). Defaults to OR. """ authorizationRuleMode: AuthorizationRuleMode """Custom text for the login button""" buttonText: String """URL or base64 encoded icon for the login button""" buttonIcon: String """ Button variant style from Reka UI. See https://reka-ui.com/docs/components/button """ buttonVariant: String """ Custom CSS styles for the button (e.g., "background: linear-gradient(to right, #4f46e5, #7c3aed); border-radius: 9999px;") """ buttonStyle: String } """ Mode for evaluating authorization rules - OR (any rule passes) or AND (all rules must pass) """ enum AuthorizationRuleMode { OR AND } type OidcConfiguration { """List of configured OIDC providers""" providers: [OidcProvider!]! """ Default allowed redirect origins that apply to all OIDC providers (e.g., Tailscale domains) """ defaultAllowedOrigins: [String!] } type OidcSessionValidation { valid: Boolean! username: String } type PublicOidcProvider { id: ID! name: String! buttonText: String buttonIcon: String buttonVariant: String buttonStyle: String } type UPSBattery { """ Battery charge level as a percentage (0-100). Unit: percent (%). Example: 100 means battery is fully charged """ chargeLevel: Int! """ Estimated runtime remaining on battery power. Unit: seconds. Example: 3600 means 1 hour of runtime remaining """ estimatedRuntime: Int! """ Battery health status. Possible values: 'Good', 'Replace', 'Unknown'. Indicates if the battery needs replacement """ health: String! } type UPSPower { """ Input voltage from the wall outlet/mains power. Unit: volts (V). Example: 120.5 for typical US household voltage """ inputVoltage: Float! """ Output voltage being delivered to connected devices. Unit: volts (V). Example: 120.5 - should match input voltage when on mains power """ outputVoltage: Float! """ Current load on the UPS as a percentage of its capacity. Unit: percent (%). Example: 25 means UPS is loaded at 25% of its maximum capacity """ loadPercentage: Int! } type UPSDevice { """ Unique identifier for the UPS device. Usually based on the model name or a generated ID """ id: ID! """Display name for the UPS device. Can be customized by the user""" name: String! """UPS model name/number. Example: 'APC Back-UPS Pro 1500'""" model: String! """ Current operational status of the UPS. Common values: 'Online', 'On Battery', 'Low Battery', 'Replace Battery', 'Overload', 'Offline'. 'Online' means running on mains power, 'On Battery' means running on battery backup """ status: String! """Battery-related information""" battery: UPSBattery! """Power-related information""" power: UPSPower! } type UPSConfiguration { """ UPS service state. Values: 'enable' or 'disable'. Controls whether the UPS monitoring service is running """ service: String """ Type of cable connecting the UPS to the server. Common values: 'usb', 'smart', 'ether', 'custom'. Determines communication protocol """ upsCable: String """ Custom cable configuration string. Only used when upsCable is set to 'custom'. Format depends on specific UPS model """ customUpsCable: String """ UPS communication type. Common values: 'usb', 'net', 'snmp', 'dumb', 'pcnet', 'modbus'. Defines how the server communicates with the UPS """ upsType: String """ Device path or network address for UPS connection. Examples: '/dev/ttyUSB0' for USB, '192.168.1.100:3551' for network. Depends on upsType setting """ device: String """ Override UPS capacity for runtime calculations. Unit: volt-amperes (VA). Example: 1500 for a 1500VA UPS. Leave unset to use UPS-reported capacity """ overrideUpsCapacity: Int """ Battery level threshold for shutdown. Unit: percent (%). Example: 10 means shutdown when battery reaches 10%. System will shutdown when battery drops to this level """ batteryLevel: Int """ Runtime threshold for shutdown. Unit: minutes. Example: 5 means shutdown when 5 minutes runtime remaining. System will shutdown when estimated runtime drops below this """ minutes: Int """ Timeout for UPS communications. Unit: seconds. Example: 0 means no timeout. Time to wait for UPS response before considering it offline """ timeout: Int """ Kill UPS power after shutdown. Values: 'yes' or 'no'. If 'yes', tells UPS to cut power after system shutdown. Useful for ensuring complete power cycle """ killUps: String """ Network Information Server (NIS) IP address. Default: '0.0.0.0' (listen on all interfaces). IP address for apcupsd network information server """ nisIp: String """ Network server mode. Values: 'on' or 'off'. Enable to allow network clients to monitor this UPS """ netServer: String """ UPS name for network monitoring. Used to identify this UPS on the network. Example: 'SERVER_UPS' """ upsName: String """ Override UPS model name. Used for display purposes. Leave unset to use UPS-reported model """ modelName: String } type VmDomain implements Node { """The unique identifier for the vm (uuid)""" id: PrefixedID! """A friendly name for the vm""" name: String """Current domain vm state""" state: VmState! """The UUID of the vm""" uuid: String @deprecated(reason: "Use id instead") } """The state of a virtual machine""" enum VmState { NOSTATE RUNNING IDLE PAUSED SHUTDOWN SHUTOFF CRASHED PMSUSPENDED } type Vms implements Node { id: PrefixedID! domains: [VmDomain!] domain: [VmDomain!] } type Uptime { timestamp: String } type Service implements Node { id: PrefixedID! name: String online: Boolean uptime: Uptime version: String } type UserAccount implements Node { id: PrefixedID! """The name of the user""" name: String! """A description of the user""" description: String! """The roles of the user""" roles: [Role!]! """The permissions of the user""" permissions: [Permission!] } type Plugin { """The name of the plugin package""" name: String! """The version of the plugin package""" version: String! """Whether the plugin has an API module""" hasApiModule: Boolean """Whether the plugin has a CLI module""" hasCliModule: Boolean } type AccessUrl { type: URL_TYPE! name: String ipv4: URL ipv6: URL } enum URL_TYPE { LAN WIREGUARD WAN MDNS OTHER DEFAULT } """ A field whose value conforms to the standard URL format as specified in RFC3986: https://www.ietf.org/rfc/rfc3986.txt. """ scalar URL type AccessUrlObject { ipv4: String ipv6: String type: URL_TYPE! name: String } type ApiKeyResponse { valid: Boolean! error: String } type MinigraphqlResponse { status: MinigraphStatus! timeout: Int error: String } """The status of the minigraph""" enum MinigraphStatus { PRE_INIT CONNECTING CONNECTED PING_FAILURE ERROR_RETRYING } type CloudResponse { status: String! ip: String error: String } type RelayResponse { status: String! timeout: String error: String } type Cloud { error: String apiKey: ApiKeyResponse! relay: RelayResponse minigraphql: MinigraphqlResponse! cloud: CloudResponse! allowedOrigins: [String!]! } type RemoteAccess { """The type of WAN access used for Remote Access""" accessType: WAN_ACCESS_TYPE! """The type of port forwarding used for Remote Access""" forwardType: WAN_FORWARD_TYPE """The port used for Remote Access""" port: Int } enum WAN_ACCESS_TYPE { DYNAMIC ALWAYS DISABLED } enum WAN_FORWARD_TYPE { UPNP STATIC } type DynamicRemoteAccessStatus { """The type of dynamic remote access that is enabled""" enabledType: DynamicRemoteAccessType! """The type of dynamic remote access that is currently running""" runningType: DynamicRemoteAccessType! """Any error message associated with the dynamic remote access""" error: String } enum DynamicRemoteAccessType { STATIC UPNP DISABLED } type ConnectSettingsValues { """The type of WAN access used for Remote Access""" accessType: WAN_ACCESS_TYPE! """The type of port forwarding used for Remote Access""" forwardType: WAN_FORWARD_TYPE """The port used for Remote Access""" port: Int } type ConnectSettings implements Node { id: PrefixedID! """The data schema for the Connect settings""" dataSchema: JSON! """The UI schema for the Connect settings""" uiSchema: JSON! """The values for the Connect settings""" values: ConnectSettingsValues! } type Connect implements Node { id: PrefixedID! """The status of dynamic remote access""" dynamicRemoteAccess: DynamicRemoteAccessStatus! """The settings for the Connect instance""" settings: ConnectSettings! } type Network implements Node { id: PrefixedID! accessUrls: [AccessUrl!] } input AccessUrlObjectInput { ipv4: String ipv6: String type: URL_TYPE! name: String } """ ### Description: ID scalar type that prefixes the underlying ID with the server identifier on output and strips it on input. We use this scalar type to ensure that the ID is unique across all servers, allowing the same underlying resource ID to be used across different server instances. #### Input Behavior: When providing an ID as input (e.g., in arguments or input objects), the server identifier prefix (':') is optional. - If the prefix is present (e.g., '123:456'), it will be automatically stripped, and only the underlying ID ('456') will be used internally. - If the prefix is absent (e.g., '456'), the ID will be used as-is. This makes it flexible for clients, as they don't strictly need to know or provide the server ID. #### Output Behavior: When an ID is returned in the response (output), it will *always* be prefixed with the current server's unique identifier (e.g., '123:456'). #### Example: Note: The server identifier is '123' in this example. ##### Input (Prefix Optional): ```graphql # Both of these are valid inputs resolving to internal ID '456' { someQuery(id: "123:456") { ... } anotherQuery(id: "456") { ... } } ``` ##### Output (Prefix Always Added): ```graphql # Assuming internal ID is '456' { "data": { "someResource": { "id": "123:456" } } } ``` """ scalar PrefixedID type Query { """ #### Required Permissions: - Action: **READ_ANY** - Resource: **API_KEY** """ apiKeys: [ApiKey!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **API_KEY** """ apiKey(id: PrefixedID!): ApiKey """ #### Required Permissions: - Action: **READ_ANY** - Resource: **PERMISSION** #### Description: All possible roles for API keys """ apiKeyPossibleRoles: [Role!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **PERMISSION** #### Description: All possible permissions for API keys """ apiKeyPossiblePermissions: [Permission!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **PERMISSION** #### Description: Get the actual permissions that would be granted by a set of roles """ getPermissionsForRoles(roles: [Role!]!): [Permission!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **PERMISSION** #### Description: Preview the effective permissions for a combination of roles and explicit permissions """ previewEffectivePermissions(roles: [Role!], permissions: [AddPermissionInput!]): [Permission!]! """Get all available authentication actions with possession""" getAvailableAuthActions: [AuthAction!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **API_KEY** #### Description: Get JSON Schema for API key creation form """ getApiKeyCreationFormSchema: ApiKeyFormSettings! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **CONFIG** """ config: Config! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **FLASH** """ flash: Flash! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **ME** """ me: UserAccount! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **NOTIFICATIONS** #### Description: Get all notifications """ notifications: Notifications! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **ONLINE** """ online: Boolean! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **OWNER** """ owner: Owner! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **REGISTRATION** """ registration: Registration """ #### Required Permissions: - Action: **READ_ANY** - Resource: **SERVERS** """ server: Server """ #### Required Permissions: - Action: **READ_ANY** - Resource: **SERVERS** """ servers: [Server!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **SERVICES** """ services: [Service!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **SHARE** """ shares: [Share!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **VARS** """ vars: Vars! isInitialSetup: Boolean! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **VMS** #### Description: Get information about all VMs on the system """ vms: Vms! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **ARRAY** """ parityHistory: [ParityCheck!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **ARRAY** """ array: UnraidArray! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **CUSTOMIZATIONS** """ customization: Customization publicPartnerInfo: PublicPartnerInfo publicTheme: Theme! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **DOCKER** """ docker: Docker! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **DISK** """ disks: [Disk!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **DISK** """ disk(id: PrefixedID!): Disk! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **FLASH** """ rclone: RCloneBackupSettings! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **INFO** """ info: Info! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **LOGS** """ logFiles: [LogFile!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **LOGS** """ logFile(path: String!, lines: Int, startLine: Int): LogFileContent! settings: Settings! isSSOEnabled: Boolean! """Get public OIDC provider information for login buttons""" publicOidcProviders: [PublicOidcProvider!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **CONFIG** #### Description: Get all configured OIDC providers (admin only) """ oidcProviders: [OidcProvider!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **CONFIG** #### Description: Get a specific OIDC provider by ID """ oidcProvider(id: PrefixedID!): OidcProvider """ #### Required Permissions: - Action: **READ_ANY** - Resource: **CONFIG** #### Description: Get the full OIDC configuration (admin only) """ oidcConfiguration: OidcConfiguration! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **CONFIG** #### Description: Validate an OIDC session token (internal use for CLI validation) """ validateOidcSession(token: String!): OidcSessionValidation! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **INFO** """ metrics: Metrics! upsDevices: [UPSDevice!]! upsDeviceById(id: String!): UPSDevice upsConfiguration: UPSConfiguration! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **CONFIG** #### Description: List all installed plugins with their metadata """ plugins: [Plugin!]! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **CONNECT** """ remoteAccess: RemoteAccess! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **CONNECT** """ connect: Connect! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **NETWORK** """ network: Network! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **CLOUD** """ cloud: Cloud! } type Mutation { """Creates a new notification record""" createNotification(input: NotificationData!): Notification! deleteNotification(id: PrefixedID!, type: NotificationType!): NotificationOverview! """Deletes all archived notifications on server.""" deleteArchivedNotifications: NotificationOverview! """Marks a notification as archived.""" archiveNotification(id: PrefixedID!): Notification! archiveNotifications(ids: [PrefixedID!]!): NotificationOverview! archiveAll(importance: NotificationImportance): NotificationOverview! """Marks a notification as unread.""" unreadNotification(id: PrefixedID!): Notification! unarchiveNotifications(ids: [PrefixedID!]!): NotificationOverview! unarchiveAll(importance: NotificationImportance): NotificationOverview! """Reads each notification to recompute & update the overview.""" recalculateOverview: NotificationOverview! array: ArrayMutations! docker: DockerMutations! vm: VmMutations! parityCheck: ParityCheckMutations! apiKey: ApiKeyMutations! rclone: RCloneMutations! """Initiates a flash drive backup using a configured remote.""" initiateFlashBackup(input: InitiateFlashBackupInput!): FlashBackupStatus! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **CONFIG** """ updateSettings(input: JSON!): UpdateSettingsResponse! configureUps(config: UPSConfigInput!): Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **CONFIG** #### Description: Add one or more plugins to the API. Returns false if restart was triggered automatically, true if manual restart is required. """ addPlugin(input: PluginManagementInput!): Boolean! """ #### Required Permissions: - Action: **DELETE_ANY** - Resource: **CONFIG** #### Description: Remove one or more plugins from the API. Returns false if restart was triggered automatically, true if manual restart is required. """ removePlugin(input: PluginManagementInput!): Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **CONFIG** """ updateApiSettings(input: ConnectSettingsInput!): ConnectSettingsValues! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **CONNECT** """ connectSignIn(input: ConnectSignInInput!): Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **CONNECT** """ connectSignOut: Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **CONNECT** """ setupRemoteAccess(input: SetupRemoteAccessInput!): Boolean! """ #### Required Permissions: - Action: **UPDATE_ANY** - Resource: **CONNECT__REMOTE_ACCESS** """ enableDynamicRemoteAccess(input: EnableDynamicRemoteAccessInput!): Boolean! } input NotificationData { title: String! subject: String! description: String! importance: NotificationImportance! link: String } input InitiateFlashBackupInput { """The name of the remote configuration to use for the backup.""" remoteName: String! """Source path to backup (typically the flash drive).""" sourcePath: String! """Destination path on the remote.""" destinationPath: String! """ Additional options for the backup operation, such as --dry-run or --transfers. """ options: JSON } input UPSConfigInput { """Enable or disable the UPS monitoring service""" service: UPSServiceState """Type of cable connecting the UPS to the server""" upsCable: UPSCableType """ Custom cable configuration (only used when upsCable is CUSTOM). Format depends on specific UPS model """ customUpsCable: String """UPS communication protocol""" upsType: UPSType """ Device path or network address for UPS connection. Examples: '/dev/ttyUSB0' for USB, '192.168.1.100:3551' for network """ device: String """ Override UPS capacity for runtime calculations. Unit: watts (W). Leave unset to use UPS-reported capacity """ overrideUpsCapacity: Int """ Battery level percentage to initiate shutdown. Unit: percent (%) - Valid range: 0-100 """ batteryLevel: Int """Runtime left in minutes to initiate shutdown. Unit: minutes""" minutes: Int """ Time on battery before shutdown. Unit: seconds. Set to 0 to disable timeout-based shutdown """ timeout: Int """ Turn off UPS power after system shutdown. Useful for ensuring complete power cycle """ killUps: UPSKillPower } """Service state for UPS daemon""" enum UPSServiceState { ENABLE DISABLE } """UPS cable connection types""" enum UPSCableType { USB SIMPLE SMART ETHER CUSTOM } """UPS communication protocols""" enum UPSType { USB APCSMART NET SNMP DUMB PCNET MODBUS } """Kill UPS power after shutdown option""" enum UPSKillPower { YES NO } input PluginManagementInput { """Array of plugin package names to add or remove""" names: [String!]! """ Whether to treat plugins as bundled plugins. Bundled plugins are installed to node_modules at build time and controlled via config only. """ bundled: Boolean! = false """ Whether to restart the API after the operation. When false, a restart has already been queued. """ restart: Boolean! = true } input ConnectSettingsInput { """The type of WAN access to use for Remote Access""" accessType: WAN_ACCESS_TYPE """The type of port forwarding to use for Remote Access""" forwardType: WAN_FORWARD_TYPE """ The port to use for Remote Access. Not required for UPNP forwardType. Required for STATIC forwardType. Ignored if accessType is DISABLED or forwardType is UPNP. """ port: Int } input ConnectSignInInput { """The API key for authentication""" apiKey: String! """User information for the sign-in""" userInfo: ConnectUserInfoInput } input ConnectUserInfoInput { """The preferred username of the user""" preferred_username: String! """The email address of the user""" email: String! """The avatar URL of the user""" avatar: String } input SetupRemoteAccessInput { """The type of WAN access to use for Remote Access""" accessType: WAN_ACCESS_TYPE! """The type of port forwarding to use for Remote Access""" forwardType: WAN_FORWARD_TYPE """ The port to use for Remote Access. Not required for UPNP forwardType. Required for STATIC forwardType. Ignored if accessType is DISABLED or forwardType is UPNP. """ port: Int } input EnableDynamicRemoteAccessInput { """The AccessURL Input for dynamic remote access""" url: AccessUrlInput! """Whether to enable or disable dynamic remote access""" enabled: Boolean! } input AccessUrlInput { type: URL_TYPE! name: String ipv4: URL ipv6: URL } type Subscription { """ #### Required Permissions: - Action: **READ_ANY** - Resource: **NOTIFICATIONS** """ notificationAdded: Notification! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **NOTIFICATIONS** """ notificationsOverview: NotificationOverview! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **OWNER** """ ownerSubscription: Owner! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **SERVERS** """ serversSubscription: Server! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **ARRAY** """ parityHistorySubscription: ParityCheck! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **ARRAY** """ arraySubscription: UnraidArray! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **LOGS** """ logFile(path: String!): LogFileContent! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **INFO** """ systemMetricsCpu: CpuUtilization! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **INFO** """ systemMetricsCpuTelemetry: CpuPackages! """ #### Required Permissions: - Action: **READ_ANY** - Resource: **INFO** """ systemMetricsMemory: MemoryUtilization! upsUpdates: UPSDevice! }